After the recent rains and cool temperatures, swimming may be the last thing on your mind. But it is mid-March and as anyone who has spent a few years in Texas can tell you, it is going to get hot fast. Now is the time to make sure your swimming pool is ready for summer.
Following is a basic guide to preparing your pool for summer fun.
1. Remove the pool cover and clean it.
If you have a solid pool cover then it should have come with a cover pump for removing excess water from the top of it. For both solid and mesh covers, remove leaves and debris and lay it out to dry. (Be careful when drying a solid cover on grass since leaving it on the grass for too long can damage the lawn, especially on a hot day.) Store it according to your manufacturer’s instructions, ideally indoors and away from rodents.
2. Inspect the entire pool’s surface for damage.
Look for leaks, tears in the vinyl liner, damaged tiles or cracks. There is no sense in adding water if you will have to drain the pool to repair it.
3. Add water until the level reaches halfway up the skimmer opening.
4. Turn on the pump.
Prime the pump then turn it on. Closely monitor the pressure gauge and be ready to immediately turn off the pump if the pressure starts rising well above normal. If you are not getting pressure, check pipes for leaks, re-prime and try again.
5. Ensure that your skimmer and filter are working correctly.
If you did not clean your filter at the end of last season, do it now while the pump is running.
6. Perform a safety and equipment inspection.
Over the next few days, check for leaks or damage. Carefully monitor the water level Check all electrical connections to ensure they are in proper working order and in good repair. Remove any tripping hazard. Make certain that all entry points to the pool area—such as gates or doors—are secure and working properly. Be sure that rescue equipment—life preservers, catch poles, etc.—are in good condition and in place to be ready for an emergency. Also, be sure a first-aid kit is easily accessible in case of falls, cuts or other non-drowning emergencies that can happen near your pool.
7. Clean the pool.
Skim, vacuum then brush the pool.
8. Run the pump for five (5) hours then test the water.
After thoroughly cleaning the pool, run the pump for at least five (5) hours. Then, test the water’s chemistry using a quality pool water testing kit. (Many pool supply/cleaning businesses will allow you to bring them a water sample for testing.)
9. Add chemicals to balance the water’s chemistry.
Carefully read and follow the chemical manufacturer’s instructions for adding chemicals to your pool. Because of the potential hazards of working with and storing chemicals, many people opt to have this step performed by professionals.
You can save a bit of money by doing some or all of the maintenance yourself. But if you either want some help or prefer that a professional handle every aspect of your pool’s care, there are companies eager to help.
You can find service providers for Cypress by visiting our Service Providers page.